Step 3. Remove Wheel & Step Assembly - MacDon M Series Assembly Instructions Manual

STEP 3. REMOVE WHEEL & STEP
ASSEMBLY
a. Remove shipping wire and bolt securing hose
support to shipping frame and remove hose
support.
b. Lay hose support off to the side.
c. Remove the two ¾ in.x16.5 lg. bolts at front
frame beam. Retain for reinstallation.
d. Remove the 1 inch (25.4 mm) pin at the center
link.
Form # 169242
UNLOADING AND ASSEMBLY
11
e. Remove the four (two per side) carriage bolts at
the rear of the wheel/step assembly.
f. Remove plastic cable tie and shipping wire
securing hose bundles to frame.
(continued next page)
Model Year - 2009