Step 4. Remove Drive Wheels - MacDon M Series Assembly Instructions Manual

STEP 4. REMOVE DRIVE WHEELS

IMPORTANT
Remove the drive wheels as a pair
from above the hood.
a. Remove the two bolts at front cross member
over the hood.
b. Remove one bolt at rear of hood directly under
center of drive wheel.
c. Attach a lifting device to lift hooks located in the
center of each drive wheel.
Form # 169242
UNLOADING AND ASSEMBLY
13
d. Carefully lift wheels off frame.
IMPORTANT
Ensure that tire is guided away from
cab roof when lifting wheels to prevent
damage to the cab. Chain on forward
wheel should be snug and loose on
the aft wheel.
e. Set wheels aside for later installation.
Model Year - 2009