Step 22. Remove Windrower Tractor From Stand; Factory Stand; Field Constructed Stand - MacDon M Series Assembly Instructions Manual

STEP 22. REMOVE WINDROWER
TRACTOR FROM STAND
A. FACTORY STAND
a. Open valve on air supply control to raise
windrower tractor slightly and take load off lift
locks.
b. Release lift lock mechanism (3 places) and turn
keeper to keep lock in released position.
c. Lower machine to ground by slowly releasing
pressure to air bag system.
CAUTION
Ensure all three lifts have fully retracted and
are clear of windrower tractor frame before
driving tractor ahead.
d. Start engine and drive machine straight ahead
leaving shipping support channels supported on
rear support stand.
Form # 169242
UNLOADING AND ASSEMBLY
B. FIELD CONSTRUCTED STAND
a. Position a jack under the jack point of each drive
b. Raise jacks to take weight off stands, and
c. Slowly lower tractor to ground and remove jacks.
44
wheel leg and another under the rear hitch.
remove stands.
Model Year - 2009