MacDon M Series Assembly Instructions Manual page 37

g. Check that vertical rail tubes are parallel with
cab posts when viewing from the rear. Laterally
adjust king pin mounting as required.
h. Slowly close platform to check that front fork
engages laterally into the wheels.
i. Relocate steering arm into either of the other
holes on the bracket if major adjustment is
required.
Form # 169242
UNLOADING AND ASSEMBLY
35
j. Move fork on platform for small adjustments by
loosening bolts, moving fork, and re-tightening
bolts.
k. Adjust platform horizontally with the ½ in.x2.25
bolt so that fork precisely engages the rollers.
l. Tighten the three attachment bolts to 80 ft·lbf
(108 N·m).
Model Year - 2009