MacDon M Series Assembly Instructions Manual page 18

e. Thread wiring harness through support tube so
that connector is visible at light assembly.
f. Stuff foam into end of tube to help prevent dust
and noise from entering the cab.
g. Connect harness to connector at light.
h. Repeat steps c. to g. for opposite light assembly.
i. Remove roof support and lower roof.
IMPORTANT
Ensure roof bolts clear grommets in
frame.
j. Re-install washers and nuts at the six locations.
k. Re-install plastic caps.
Form # 169242
UNLOADING AND ASSEMBLY
16 Model Year - 2009