Step 1. Unload Container; Step 2. Move To Assembly Area; Crane Method - MacDon M Series Assembly Instructions Manual

STEP 1. UNLOAD CONTAINER

CAUTION
To avoid injury to bystanders from being
struck by machinery, do not allow persons to
stand in unloading area.
a. Move trailer into position and block trailer
wheels.
b. Lower trailer storage stands.
c. Open container doors and remove all blocking.
d. Check container floor for nails or other
obstructions and remove if necessary.
e. Position platform or ramp at container opening.
f. Attach chain/pull strap to slots in support
channels as shown.
g. Pull tractor from container onto platform.
Form # 169242
UNLOADING AND ASSEMBLY
STEP 2. MOVE TO ASSEMBLY
A. CRANE METHOD
a. Attach chains or cable to the four lift points on
8
AREA
CAUTION
To avoid injury to bystanders from being
struck by machinery, do not allow persons to
stand in unloading area.
CAUTION
Equipment used for unloading must meet or
exceed the requirements specified below.
Using inadequate equipment may result in
chain breakage, vehicle tipping or machine
damage.
LIFTING VEHICLE
Min. Lifting Capacity
CHAIN
Type
Min. Working Load
the lifting frame (MacDon Part # 163871) and
connect loop ends to crane hook. Use cable or
chain with a minimum lifting capacity of 7100 lb
(3221 kg).
20,000 lb (9072 kg)
Overhead Lifting
Quality (1/2 inch)
7100 lb (3221 kg)
(continued next page)
Model Year - 2009