MacDon M Series Assembly Instructions Manual page 30

RED
7. Locate two hoses (red ties) inside frame.
8. Route RH hose behind bundle.
9. Remove caps, make connection and tighten
fitting.
10. Push hose into frame.
11. Retrieve long hose 119328 (white tie) and
route through hole in LH frame.
12. Remove caps on hose and valve block fitting
(white tie) and make connection.
fitting.
Form # 169242
UNLOADING AND ASSEMBLY
119328 WHITE
WHITE
Tighten
13. Remove the caps from three fittings (blue,
orange, and yellow ties) on the valve block
from inboard side of frame.
14. Loosen bolts and move valve block to
improve access through hole in frame for
wrenches when tightening fittings.
BLUE
ORANGE
15. Retrieve
connections on valve block. Tighten fittings.
16. Reposition valve block and re-tighten bolts.
28
ORANGE
BLUE
YELLOW
YELLOW
matching hoses and
(continued next page)
Model Year - 2009
make