Step 7. Remove Leg Assemblies - MacDon M Series Assembly Instructions Manual

STEP 7. REMOVE LEG
ASSEMBLIES
a. Ensure that lift bar is attached to leg assembly
as shown and that clevis pin is installed with
head on near side.
b. Attach chain to lifting bar on leg assembly and
hook up to lifting device with a minimum lifting
capacity of 5000 lb (2268 kg).
c. Remove two bolts at lower support channel.
Form # 169242
UNLOADING AND ASSEMBLY
d. Remove two bolts near top of leg and remove
e. Lift off leg assembly and set securely on level
f.
17
bars from leg.
NOTE
Insert cardboard or foam between leg
assembly and
damage to hood.
ground.
Repeat above steps for second leg assembly.
hood to prevent
Model Year - 2009