Step 10. Lift Windrower Tractor Onto Stand; Crane Method - MacDon M Series Assembly Instructions Manual

STEP 10. LIFT WINDROWER
TRACTOR ONTO STAND
CAUTION
To avoid injury to bystanders from being
struck by machinery, do not allow persons to
stand in unloading area.
CAUTION
Equipment used for unloading must meet or
exceed the requirements specified below.
Using inadequate equipment may result in
chain breakage, vehicle tipping or machine
damage.
A. CRANE METHOD
LIFTING VEHICLE
Crane
CHAIN
Type
Min. Working Load
a. Attach four chains or cables to the four lift
points on the lifting frame (MacDon Part #
163871) and connect loop ends to crane hook.
Use cable or chain with a minimum lifting
capacity of 7100 lb (3221 kg).
Form # 169242
UNLOADING AND ASSEMBLY
Min. Lifting Capacity
20000 lb (9072 kg)
Overhead Lifting
Quality (1/2 inch)
7100 lb (3221 kg)
b. Attach the lifting frame to the four designated lift
points on windrower tractor shipping frame as
shown.
CAUTION
Stand clear when lifting, as machine may
swing.
c. Lift windrower tractor onto stand.
d. Remove chains from shipping frame and set
lifting frame assembly clear of work area.
19 Model Year - 2009