14. Connect the electrical harness to connector (A)
(located beside the forward valve block on the
windrower).
15. Move windrower platform (A) to CLOSED position.
5.7.3 Attaching the Header (M200 Windrowers)
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
Refer to your windrower operator's manual for procedures to mechanically attach the header to the self-propelled
windrower. Refer to the following procedures for electrical and hydraulic connections:
169457
OPERATION
Figure 5.35: Hydraulic Couplers
Figure 5.36: Windrower LH Platform
47
Revision G