Step 21. Check Traction Drive - MacDon M Series Assembly Instructions Manual

STEP 21. CHECK TRACTION
DRIVE
CAUTION
Check to be sure all bystanders have cleared
the area.
M150, M200 SHOWN – M100 SIMILAR
a. With engine running, move GSL out of N-
DETENT and slowly move GSL forward.
b. Drive wheels should be rotating in the forward
direction and at the same speed.
c. Turn steering wheel and observe motion of drive
wheels. They should rotate at different speeds,
with the slower rotating wheel on the same side
of the machine that the steering wheel was
turned toward.
d. Repeat above for opposite direction.
e. Move GSL back into reverse. Drive wheels
should be rotating in the reverse direction and at
the same speed.
f. Move GSL back into N-DETENT and shutdown
engine.
Form # 169242
UNLOADING AND ASSEMBLY
43 Model Year - 2009