Step 5. Remove Platform/Light Assembly - MacDon M Series Assembly Instructions Manual

STEP 5. REMOVE
PLATFORM/LIGHT
ASSEMBLY
a. Remove the two support tubes on either side of
hood.
b. Attach slings (to prevent paint damage) to
platform at locations shown and to a lifting
device with a minimum lifting capacity of 5000 lb
(2268 kg) and a lift height of 13 feet (4 m).
c. Remove two 5/8 in.x5.0 bolts at top of vertical
support and two bolts on bottom of support
brace.
Form # 169242
UNLOADING AND ASSEMBLY
d. Cut plastic cable ties and move hose bundle
e. Carefully lift platform/light assembly off frame
f.
14
clear of platform.
NOTE
The M100 windrower is equipped with
only one platform.
until rails clear windrower tractor legs.
Back away from windrower tractor and set
assembly on a level surface. Protect handrails
with foam or cardboard to prevent paint damage.
Model Year - 2009