Log Format; Log Messages; Table 127 Log Format; Table 128 Log Messages - ZyXEL Communications IES-1248-51V User Manual

Chapter 47 Diagnostic

47.2 Log Format

The common format of the system logs is: <item no> <time> <process> <type>
<log message>.

Table 127 Log Format

LABEL
<item no>
<time>
<process>
<type>
<log message>

47.2.1 Log Messages

The following table lists and describes the system log messages.

Table 128 Log Messages

LOG MESSAGE
ADSL <port> Link
Up(SN=<seq no>): <ds
rate>/<us rate>!
or
ADSL Link Info: NM:<ds
NM>/<us NM>!
ADSL <port> Link
Down(SN=<seq no>)!
Session Begin!
Session End!
Incorrect Password!
Received Firmware
Checksum Error!
Received Firmware Size
too large!
380
DESCRIPTION
This is the index number of the log entry.
This is the time and date when the log was created.
This is the process that created the log.
This identifies what kind of log it is. "INFO" identifies an information
log. "WARN" identifies a warning log.
This is the log's detailed information (see
TYPE DESCRIPTION
An ADSL port established a connection.
INFO
<port> - port number
<seq no> - sequence number of the connection
<ds rate> - downstream rate
<us rate> - upstream rate
<us NM> - upstream noise margin
<ds NM> - downstream noise margin
An ADSL port lost its connection.
WARN
<port> - port number
<seq no> - sequence number of the connection
A console, telnet or FTP session has begun (see the
INFO
<process> field for the type of session).
A console telnet or FTP session has terminated (see
INFO
the <process> field for the type of session).
Someone attempted to use the wrong password to
WARN
start a console, telnet or FTP session (see the
<process> field for the type of session).
A checksum error was detected during an attempted
WARN
FTP firmware upload.
The file size was too large with an attempted FTP
WARN
firmware upload.
Table 128 on page 380).
IES-1248-51V User's Guide