Dimension ES-4024 Ethernet Switch
LABEL
Delete
Select this check box and click Delete to remove the selected entry.
Delete
Click Delete to remove the selected entry from the table.
Cancel
Click Cancel to clear the check boxes in the Delete column.
6.7 Port Setup
Click Basic Setting and then Port Setup in the navigation panel to enter the port configuration screen. You may
configure any of the 26 Ethernet ports (ports 25 and 26 are the gigabit ports on the GBIC modules).
The following table describes the labels in this screen.
LABEL
Port
This is the port index number.
Active
Select this check box to enable a port. The factory default for all ports is enabled. A port must be
enabled for data transmission to occur.
6-8
Table 6-5 IP Setup: View Settings
Deleting all IP domain entries locks you out from the switch.
Figure 6-6 Port Setup
Table 6-6 Port Setup
DESCRIPTION
DESCRIPTION
Basic Setting