Setting The Luminance Pid Number; Setting The Chrominance Pid Number; Setting The Vanc Pid Number; Configuring The Headphone Monitor - evertz 7772MFX-HD Manual

7700 MultiFrame Manual
7772MFX-HD JPEG2000 SD & HD Encoder and Decoder

6.3.4. Setting the Luminance PID Number

Transport Stream Control
LUMI
32 to 8191

6.3.5. Setting the Chrominance PID Number

Transport Stream Control
CHRI
32 to 8191

6.3.6. Setting the VANC PID Number

Transport Stream Control
VANI
32 to 8191
6.4.

CONFIGURING THE HEADPHONE MONITOR

The Headphone Monitor menus are used to configure parameters associated with the headphone jack on
the module. The chart below shows the items available in the Headphone Monitor menu. The following
sections provide detailed information about each of the menu items.
HVOL Headphone volume
HSRC Headphone source

6.4.1. Setting the Headphone Volume

Headphone Monitor
HVOL
HV00 to HV15
HV07
7772MFX-HD - 16
This control selects the luminance PID Number. Luminance is carried
separately from chrominance in the 7772MFX-HD.
The luminance PID range is from 32 to 8191. The default value is 34.
This control selects the chrominance PID Number.
carried separately from luminance in the 7772MFX-HD.
The chrominance PID range is from 32 to 8191. The default value is 35.
This control selects the PID Number to carry VANC (Vertical Ancillary
data) in the transport stream. All VANC information in the input signal
will be carried in the ASI stream under the VANC PID.
The range is from 32 to 8191. The default value is 36.
Sets the volume for the headphone
Selects the source for the headphone monitoring
With this control you can set the headphone volume to one of 16 levels.
Total adjustment range is over 50 dB. Level 00 is the lowest volume
and is effectively mute.
Revision 1.2
Chrominance is