Table of Contents
Advertisement
5.6.15. WIN DLO (14) Data Logging Output
DLO:5 12:59:59:23 9999+00 13:01:01:05
DLO Type identifier
DLO:5
12:59:59:23 video timecode
KeyKode feet and frames
9999+00
13:01:01:05 audio timecode
5.6.16. WIN VIDEO (15) Video Mode Indicator
VID: 525i/59.94 AUTOSTD AUTODEF5
Displays the current video standard, indicates whether auto video standard switching is enabled, and
(HDSD9025 only) whether auto switching between high definition and standard definition is enabled and
how many seconds before auto definition switching activates.
5.6.17. WIN BPPHASE (16) Biphase Reference Edge Phase
BF:159 BV:001 BA:001
Film timebase tic number at Reference edge of biphase
BF:159
Video timebase tic number at Reference edge of biphase
BV:001
Audio timebase tic number at Reference edge of biphase
BA:001
5.6.18. WIN KKSTAT (17) KeyKode Reader Stats
5550 CTL DISABLED
5550 POLL DISABLED
NO 5550 CTL: TXT DEBUG OUT ON
5550 CTL NOT SUPPORTED"
KK COMM NOT ACTIVE
K%098 ASYM+020 IN:999 35RN AUT
KeyKode percent valid read
K%098
KeyKode asymmetry percent
ASYM+020
KeyKode intensity setting
IN:999
Film gauge 35: 35 mm, 35R: 35 mm reverse side, 16: 16 mm
35R
N:Neg, P:Print
N
KeyKode mode MAN:Manual, AUT:auto, EXT:Extended Auto, or HNT:Hunt
AUT
TECHNICAL DESCRIPTION
9025TR Series Film Footage Encoders Manual
Parameter 25-33 set to zero: 5550 Control not enabled
Parameter 25-34 set to non-zero: 5550 Polling disabled
Character debug output instead of 5550 Control
Software does not support 5550 control
Communications has not been established
5550 Status as described below
Revision 1.3
Page 5-11
Advertisement
Table of Contents
