Selecting The Reference Input Type; Configuring The Behaviour Of The Split Screen Output On Loss Of Video; Configuring The Downconverted Split Screen Output Aspect Ratio; Configuring The Downconverted Split Screen Output Panel Colours - evertz 7700 Manual

6.2.1. Selecting the Reference Input Type

GTSD
525
7P50
7P59
1I50
1I59
625

6.2.2. Configuring the Behaviour of the Split Screen Output on Loss of Video

VIDP
PASS
BLUE

6.2.3. Configuring the Downconverted Split Screen Output Aspect Ratio

ASP1
16:9
4:3Q
4:3S

6.2.4. Configuring the Downconverted Split Screen Output Panel Colours

PCL1
BLUE
WHIT
GREN
RED
BLCK
This control selects the genlock reference type being used.
525/59.94 colour black
720p/50 Tri-level sync
720p/59.94 Tri-level sync
1080i/50 Tri-level sync
1080i/59.94 Tri-level sync
625/50 colour black
This control sets the behaviour of the Split Screen output when there is loss
of input video.
PASS – This will simply pass on the error video signal (green screen).
BLUE – This will display a blue screen on the side of the input that is
missing.
This control selects the aspect ratio setting for the Downconverted Split
Screen output.
16:9 - 16:9 Letterbox
4:3Q - 4:3 anamorphic squeeze
4:3S - 4:3 side cut (sides are removed)
This control selects the panel colours for the downconverted Split Screen
output.
The side panels or letterbox space will be filled in with selected colour.
Revision 0.3
7700 MultiFrame Manual
7760VMS-HD HD Video Monitoring Splitter
Page - 11