Output Video Controls; Video Status; Video Faults; Figure 4-9: Loss Of Video Mode - evertz MIO-CCE-4K/3G User Manual

4.5.2. Output Video Controls

Loss of Video Mode: Set the behavior of the video stream upon input loss. Options are black screen, blue
screen and freeze image.
Force Freeze Frame: Enable or disable the capacity to force freeze frame.
Crosspoint Output: Set the output type when crosspoint input video is selected. Options are Program
(PGM) & Monitor (MON).

4.5.3. Video Status

This section displays the input video source, video payload ID, and detected input video standard for the
current video signal.

4.5.4. Video Faults

Video Trap Status: This display will turn red if a genlock fault is detected, remains green if no genlock fault
is found.
Video Trap Enable: This slider control allows the user to enable sending a fault notice to the trap servers
enabled in Section 4.3.3. Slide the control to the right to enable trap, slide to left to disable.
SMPTE ST 2110/4K/3G/HD/SD Closed Caption Encoder with Media–to–IP Streaming

Figure 4-9: Loss of Video Mode

Figure 4-10 : Force Freeze Frame

Figure 4-11: Crosspoint Output

Revision 1.0
MIO–CCE–4K/3G
Page - 13