7700 MultiFrame Manual
7710XUC-HD HD Format Up/Down/Cross Converter
7.6.
SELECTING GPI 4 for 6HZ SOURCE (7710XUC-HD Only)
The 7710XUC-HD module can set the functionality of GPI 4 (see section 6.12.4). However, the user will
also have to change a jumper on the Rear I/O plate to ensure proper functionality. The location of the
jumper shown in Figure 15 will configure the Rear I/O. The jumper settings are shown in Figure 16.
Figure 15: GPI 4 Function Selection Jumper
6 Hz
GPI
Figure 16: Jumper settings
7710XUC-HD
-53
Revision 1.0