Table of Contents
Advertisement
7700 MultiFrame Manual
7702/7703DA4/8-RF Active Splitters
6.3.
VISTALINK
CONTROLLED PARAMETERS
®
The following parameter can be remotely controlled through the VistaLINK
Parameter
Input Power Upper Threshold
Input Power Lower Threshold
Output Power Upper Threshold
Output Power Lower Threshold
Gain
6.4.
VISTALINK
TRAPS
®
The following traps can be controlled through the VistaLINK
condition when its value is True.
Trap
InputPowerHigh
InputPowerLow
OutputPowerHigh
OutputPowerLow
LNBPowerShort
7702/7703DA4/8-RF - 12
Description
Sets value of the Input Upper RF Threshold.
Sets value of the Input Lower RF Threshold.
Sets value of the Output Upper RF threshold.
Sets value of the Output Lower RF threshold.
Sets the Gain level.
Table 6-2: VistaLINK
Description for True Condition
Input power is above the threshold.
Input power is below the threshold.
Output power is above the threshold.
Output power is below the threshold.
Short on LNB DC supply (for -L version only).
Table 6-3: VistaLINK
Revision 1.3
Controlled Parameters
®
interface. Each trap will indicate a fault
®
Traps
®
interface.
®
Advertisement
Table of Contents
