7.14. Setting The Cc Fault Trap Controls; Figure 7-52: Cc Fault Traps - evertz 7800 Manual

7800 MultiFrame Manual
7812DCDA2Q-HD (-AA, –AES4) Dual Path HDTV Down-converter

7.14. SETTING THE CC FAULT TRAP CONTROLS

The CC Fault Traps control enables the user to enable or disable Closed Caption traps and view trap
status. To enable a particular trap, simply click the box located beside each trap so that a check-mark
appears. When a check-mark is present, the trap is enabled. When a check-mark is not present, the trap
is disabled.
The Trap Status section defines whether a trap is present or missing. If the box is green, then the
corresponding trap is present. If the box is red, then the corresponding trap is missing.

Figure 7-52: CC Fault Traps

Page 73
Revision 1.0