Table of Contents
Advertisement
6.3.2. Setting the Input Video Standard
Video
Input Standard
Auto
1080i/59.94
1080p/29.97
1080p/29.97sF
1080p/23.98
1080p/23.98sF
1035i/59.94
720p/59.94
720p/29.97
525i/59.94
1080p/25
1080p/25sF
1080i/50
720p/50
625i/50
6.3.3. Setting the Output Video Standard
Video
Output Standard
1080i/59.94
1080p/29.97
1080p/29.97sF
1080p/23.98
1080p/23.98sF
1035i/59.94
720p/59.94
720p/29.97
525i/59.94
1080p/25
1080p/25sF
1080i/50
720p/50
625i/50
6.3.4. Selecting The Video Input Source
Video
Video Input Source
PGM IN
PGM OUT/IN
Auto
This control selects the input video standard being used. The choice of
input standards available depends on the Frame Rate menu setting. For
example, to select 1080i/59.94 as the output format, set the Frame Rate
menu to 59.94/29.97/23.98, and then set this menu item (i.e.: the Input
Standard) to 1080i59.94.
number of fields per second.
number of frames per second.
The module is not capable of temporal processing, so it will not convert
between 59.94 and 60 or between 50 and the 60 related frame rates. The
card will add or remove 3:2 pulldown when converting between nominal
24Hz and 30/60 Hz, but will not do a temporal frame conversion.
When the input standard is set to Auto, the module will auto-detect the video
standard.
This control selects the output standard. The choice of output standards
available is dependent upon the Frame Rate menu setting.
The module is not capable of temporal processing, so it will not convert
between 59.94 and 60 or between 50 and the 60 related frame rates. The
card will add or remove 3:2 pulldown when converting between nominal
24Hz and 30/60 Hz, but will not do a temporal frame conversion.
The standard-definition output video formats are always available on the
XUDC versions and therefore are not available for selection. When the
input standard is one of the HD 59.94 Hz related frame rates, the standard-
definition output of the XUDC will be 525i59.94. When the input standard is
one of the HD 50 Hz related frame rates, the standard-definition output of
the XUDC will be 625i50.
This control selects whether the source of input video will be the PGM IN
BNC or the PGM OUT/IN BNC. In order for this menu item to be enabled,
the PGM OUT/IN Mode must be set to Video Input.
When set to Auto, the module will select the BNC with a valid video input.
Revision 1.0
7710XUC-HD HD Format Up/Down/Cross Converter
Interlaced video formats are shown with the
Progressive formats are shown with the
7700 MultiFrame Manual
7710XUC-HD
-19
Advertisement
Table of Contents
