7800 MultiFrame Manual
7812DCDA2Q-HD (-AA, –AES4) Dual Path HDTV Down-converter
When the input standard is set to Auto, the module will auto detect the video standard. The full set of
available input video standards include:
Auto
1080i/59.94
720p/59.94
525i/59.94
1080i/50
720p/50
625i/50
7.1.2.
Selecting the Video Reference Source
With this control, the source of video reference for the card is selected. The VLPRO interface for the
Reference Select control appears as follows in Figure 7-4.
Video (none)
Genlock
Page 22
Figure 7-3: Video Standard Input Drop Down Menu
Automatically detect the incoming video standard
Select 1080i/59.94 as in the incoming video standard
Select 720p/59.94 as in the incoming video standard
Select 525i/59.94 as in the incoming video standard
Select 1080i/50 as in the incoming video standard
Select 720p/50 as in the incoming video standard
Select 625i/50 as in the incoming video standard
Figure 7-4: Reference Select Drop Down Menu
The module will lock to the incoming video signal.
The module will lock to the selected card reference.
Revision 1.0