Comtech EF Data CDD-562L Installation And Operation Manual page 75

CDD-562L/564 Demodulator with IP Module
Updating Firmware
Step Task
3 C. Use Windows Command-line to create the temporary folder:
(cont)
•
First, click [Start] on the Windows taskbar, and then click the Run... icon (or,
depending on Windows OS versions prior to Windows 95, click the MS-DOS Prompt
icon from the Main Menu).
•
Next, open a Command-line window...
o
o
o
o
D. Use the 'Run' and 'Browse' windows to create and rename the temporary folder.
•
Select [Start] on the Windows taskbar, and then click the Run... icon. The 'Run'
window will open.
•
Click [Browse] in the 'Run' window. The 'Browse' window will open.
•
Click the Create New Folder icon in the 'Browse' window. The new folder will be
created.
Right-click the "New Folder" folder name, and then rename this folder to "temp" or some
other convenient, unused name.
There should now be a "temp" folder created and available for placement of the firmware file
download.
For Windows 95 or Windows 98, type "command".
For any Windows OS versions later than Windows 98, type "cmd" or
"command".
Alternately, from [Start], select All Programs > Accessories > Command
Prompt.
Finally, from the Command-line prompt (c:\>), type "mkdir temp" or "md temp"
(mkdir and md stand for make directory), and then click [OK].
5–5
Revision 2
MN/CDD564L.IOM