Comtech EF Data CDD-562L Installation And Operation Manual page 229

CDD-562L/564 Demodulator with IP Module
Appendix D
Command Arguments for
Parameter (Instruction Command or
Type Code and Response to
Qualifier)
SMTP Destination SDN= 128 bytes,
Name characters,
SMTP Server IP SIA= 15 bytes,
Address numerical
SNMP Enabled SPE= 1 byte, value of
0 or 1
SNMP SRC= 255 bytes,
Read Community characters, no
spaces
SNMP SSC= 128 bytes,
System Contact characters,
SNMP SSL= 128 bytes,
System Location characters,
SNMP SSN= 128 bytes,
System Name characters,
Query
Command or Query.
SMTP Destination name of up to 128 characters.
Note: Entering an empty string will delete the destination name. To delete the destination
name, issue <1/SDN=
Example: <1/SMTP=somedestinationname
Command or Query.
Used to set the IP address of the SMTP server where mail should be sent, in the format
xxx.xxx.xxx.xxx, where xxx.xxx.xxx.xxx is the IP address.
Example: <1/SIA=010.006.030.001.
Note: When not configured, it returns >0001/SIA=0.0.0.0
Command or Query.
Enables or disables the snmp interface, where:
0 = Disabled
1 = Enabled
Note: When disabled, the user will not be able to use the snmp interface.
Command or Query.
Assigns SNMP read community string.
Example: <1/SRC=public
Note: Empty string is not allowed
Command or Query.
Assigns SNMP System Contact string.
Example: <1/SSC=Joe Net Admin.
Note: If not configured it returns empty string. <1/SSC=
Command or Query.
Assigns SNMP System Location string.
Example: <1/SSL=Upstairs back right.
Note: If not configured it returns empty string. <1/SSL=
Command or Query.
Assigns SNMP System Name string.
Example: <1/SSN=Remote1.
Note: If not configured it returns empty string. <1/SSN=
Description of Arguments
D–13
Revision 2
MN/CDD564L.IOM
Query
Response to (Instruction
Response to Query
Command Code and
Qualifier)
SDN = SDN? SDN=x [1..128]
SDN! (see Description of Arguments)
SIA = SIA? SIA=xxx.xxx.xxx.xxx (see
SIA! Description of Arguments)
SPE = SPE? SPE=x
SPE! (see Description of Arguments)
SRC = SRC? SRC=x
SRC! (see Description of Arguments)
SSC = SSC? SSC=x [1..128]
SSC! (see Description of Arguments)
SSL = SSL? SSL=x [1..128]
SSL! (see Description of Arguments)
SSN = SSN? SSN=x [1..128]
SSN! (see Description of Arguments)