Comtech EF Data CDD-562L Installation And Operation Manual page 159

CDD-562L/564 Demodulator with IP Module
CDD-56X CLI and Telnet Operation
Selection
Dump Packets sent to
EndStation
Dump Packets received from
EndStation
Ping
Traceroute
Command Line Debug Prompt
Entry Description
G Select [Yes] or [No].
Selecting [Yes] forces the IP Module
representation of each packet that is received/destined for the
demodulator only.
H Select [Yes] or [No].
Selecting [Yes] forces the IP Module
representation of each packet that is sourced from this unit and
destined for some other device. This Allows user to see what type of
packets this unit is generating internally.
P Enter the IP address in aaa.bbb.ccc.ddd format to ping, on the same
subnet as CDD-56x unit.
A Enter the IP address in aaa.bbb.ccc.ddd format
D Enter the password to access the debug command line.
Note: This option is reserved for Customer Service and
engineering use only.
8–55
Revision 2
MN/CDD564L.IOM
to dump a hexadecimal
to dump a hexadecimal