Comtech EF Data CDD-562L Installation And Operation Manual page 249

CDD-562L/564 Demodulator with IP Module
Appendix D
Param File Tag
ADMIN_PWD
READWRITE_PWD
READONLY_PWD
ACCESS_CLIENT
ACCESS_ENFORCEMENT_ENABLE
PING_REPLY_ENABLE
TELNETD_ENABLE
SNMP_ENABLE
IGMP_ENABLE
GENERIC_DOWNLINK_MCAST
QOS_ENABLE
TRANS_DES_ENABLE
TX_HDR_COMPRESSION_ENABLE
RX_HDR_COMPRESSION_ENABLE
Values Associated with Parameter
NONE – When not set
Xxxx/yyy format with xxx-user name and yyy-password. Like comtech/comtech.
NONE – When not set
Xxxx/yyy format with xxx-user name and yyy-password. Like comtech/comtech.
NONE – When not set
Xxxx/yyy format with xxx-user name and yyy-password. Like comtech/comtech.
NOT-DEFINED/NA – When not set
Valid IP address like 192.168.001.001/32
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Unavailable – If system does not has this FAST Feature available.
Enabled
Disabled
Enabled
Disabled
Unavailable – If system does not has this FAST Feature available.
Enabled
Disabled
Unavailable – If system does not has this FAST Feature available.
Per Route – If the system working mode is Router-Small, Router-Large, Router-PtoP
Enabled – If system working mode is EasyConnect
Disabled – If system working mode is EasyConnect
Unavailable – If system does not has this FAST Feature available.
Per Route – If the system working mode is Router-Small, Router-Large, Router-PtoP
Enabled – If system working mode is EasyConnect
Disabled – If system working mode is EasyConnect
Unavailable – If system does not has this FAST Feature available.
Enabled
Disabled
D–33
Revision 2
MN/CDD564L.IOM