CDD-562L/564 Demodulator with IP Module
CDD-56X CLI and Telnet Operation
8.2.5.3
(VLAN) Brouter page
Access the Brouter Configuration page from the Protocol Configuration page.
This page contains the following unique selections/fields:
Selection
VLAN Brouter Mode
VLAN Brouter Next Hop MAC
VLAN Brouter Remote Mode
Enable
VLAN Filtering
VLAN ID 1 through
VLAN ID 10
Entry
Description
Toggle VLAN Brouter Mode as [Enabled] or [Disabled]. This
feature allows VLAN tagged packets to be forwarded when in
Router mode.
B
Notes:
1. This feature is automatically disabled when Managed Switch
Mode is selected.
2. Header Compression must be purchased and available for
this feature to work.
Allows user to enter a Next Hop MAC address in 01-02-03-04-05-
N
06 format.
Toggle VLAN Brouter Remote Mode as [Enabled] or [Disabled]. In
this mode, IP traffic received from the WAN interface will not be
R
forwarded back to the WAN interface even though the route table
matches.
Toggle Filtering Mode as [Enabled] or [Disabled]. This feature,
when Enabled, allows the filtering of "Brouted" Packets – i.e., this
F
will permit the bridging of VLAN destination packets and the routing
of non-VLAN traffic using static route table information.
1-9,
Enter a valid ID in the range of 0000 to 4095.
A (for 10)
8–26
Revision 2
MN/CDD564L.IOM
Need help?
Do you have a question about the CDD-562L and is the answer not in the manual?
Questions and answers