Fast Activation Procedure; Fast Activation Via The Command Line Interface (Cli - Comtech EF Data CDD-562L Installation And Operation Manual

CDD-562L/564 Demodulator with IP Module
Appendix A
A.2

FAST Activation Procedure

A.2.1

FAST Activation via the Command Line Interface (CLI)

Chapter 8. CDD-56X CLI and TELNET OPERATION
Step Task
1 Before contacting Comtech EF Data to order FAST feature upgrades, obtain and record the
demodulator serial number:
a) From the CLI Main Menu, first type 'M' to select the Satellite Demodulator page; then,
b) The 9-digit Serial Number is displayed on the Features page.
2 View the currently installed features:
a) From the CLI Main Menu, first type 'A' to select the Administration page; then, type 'F' to
b) Options are identified as 'Available' or 'Unavailable'. Any options that are 'Unavailable'
3 Contact a Comtech EF Data sales representative during normal business hours to order features:
•
•
•
4 Enter the FAST access code(s):
a) From the CLI Main Menu, first type 'A' to select the Administration page; then, type 'F' to
b) Type 'Y' to select FAST Feature Code. At the prompt, carefully enter the 20-character
5 Reboot the unit. Select the Operations and Maintainenance page (type 'O' from the Main Menu)
and then type 'R' to Reset (reboot) the unit.
type 'F' to select the Features page.
Record Serial Number: ______________________________________
select the Feature Configuration page.
may be purchased as a FAST upgrade.
Provide the unit Serial Number to the representative.
Identify and purchase the desired FAST option(s).
Obtain the invoice, the 20-digit FAST Access Code(s), and the FAST option activation
instructions.
select the Feature Configuration page.
FAST access code.
The CLI responds with ""Fast Feature Code is Accepted. Press
Any Key to Continue."
A–2
Revision 2
MN/CDD564L.IOM