CDD-562L/564 Demodulator with Optional IP Module
Preface
•
EN 55024 – Information Technology Equipment: Immunity Characteristics, Limits, and
Methods of Measurement.
•
EN 61000-3-2 – Harmonic Currents Emission
•
EN 61000-3-3 – Voltage Fluctuations and Flicker.
•
EN 61000-4-2 – ESD Immunity
•
EN 61000-4-4 – EFT Burst Immunity
•
EN 61000-4-5 – Surge Immunity
•
EN 61000-4-6 – RF Conducted Immunity
•
EN 61000-4-8 – Power Frequency Magnetic Field Immunity
•
EN 61000-4-9 – Pulse Magnetic Field Immunity
•
EN 61000-4-11 – Voltage Dips, Interruptions, and Variations Immunity
•
EN 61000-4-13 – Immunity to Harmonics
•
Federal Communications Commission Federal Code of Regulation FCC Part 15,
Subpart B.
TO ENSURE THAT THE UNIT COMPLIES WITH THESE STANDARDS, OBEY
THESE INSTRUCTIONS:
•
Use coaxial cable that is of good quality (e.g., RG58/U (50Ω) or RG59/U (75Ω)) for
connections to the IF Tx and Rx (transmit and receive) BNC female connectors.
•
Use Type 'D' connectors that have back-shells with continuous metallic shielding.
Type 'D' cabling must have a continuous outer shield (either foil or braid, or both). The
shield must be bonded to the back-shell.
•
Operate the unit with its cover on at all times.
European Union Low Voltage Directive (LVD) (2006/95/EC)
Symbol
Description
<HAR>
Type of power cord required for use in the European Community.
CAUTION: Double-pole/Neutral Fusing
!
ACHTUNG: Zweipolige bzw. Neutralleiter-Sicherung
xvi
Revision 2
MN/CDD564L.IOM
Need help?
Do you have a question about the CDD-562L and is the answer not in the manual?
Questions and answers