Overview; Http Interface Introduction; Interface Access - Comtech EF Data CDD-562L Installation And Operation Manual

Chapter 9. CDD-56X HTTP (WEB
9.1

Overview

This chapter describes the functionality of the CDD-56X Satellite Demodulator with IP Module's
HTTP (Web Server) Interface. This non-secure interface complements operation of the
CDD-56X's use of the serial-based Command Line Interface (CLI) as well as remote control
commands and queries via the Telnet-based network management interface.
•
•
9.2

HTTP Interface Introduction

A user-supplied web browser allows the full monitor and control (M&C) of the CDD-56X from
its HTTP Interface. The CDD-56X's embedded web application is designed for, and works best
with, Microsoft's Internet Explorer Version 6.0 or higher.
9.2.1

Interface Access

Type the CDD-56X IP Address (shown here as http://xxx.xxx.xxx.xxx) into the Address area of
the user-supplied web browser:
The Login window appears, similar to the example shown here, and
prompts you to type a User name and Password.
The HTTP Interface default user names and passwords are as follows:
•
Admin
•
Read/Write
•
Read Only
SERVER) INTERFACE
Chapter 8. CDD-56X CLI
Appendix D. CDM/CDD NMCS PROTOCOL, REV 1.0
comtech/comtech
opcenter/1234
monitor/1234
TELNET OPERATION
AND
9–1