D.3.4.7.2 Argument Lists; D.3.4.8 End Of Packet - Comtech EF Data CDD-562L Installation And Operation Manual

CDD-562L/564 Demodulator with IP Module
Appendix D
D.3.4.7.2 Argument Lists
In order to enforce atomic reads and writes, and to also allow for checking related parameter for validity, multi-argument lists have the
following format:
•
Arguments are positioned in fixed length format (see specification for each argument).
•
'|' Is used to separate different argument values from each other.
D.3.4.8 End of Packet
Controller-to-Target: This is the 'Carriage Return' character (ASCII code 13).
Target-to-Controller: This is the two-character sequence 'Carriage Return' (ASCII code 13), and 'Line Feed' (ASCII code 10).
Both indicate the valid termination of a packet.
D–8
Revision 2
MN/CDD564L.IOM