Name/Password Configuration Page - Comtech EF Data CDD-562L Installation And Operation Manual

CDD-562L/564 Demodulator with IP Module
CDD-56X CLI and Telnet Operation
Selection
Managed Switch Multicast Option
Telnet timeout
8.2.2.1

Name/Password Configuration page

Access the Name/Password Configuration page from the Administration page.
1. All Usernames and Passwords are case sensitive.
2. There is a minimum of 1 and maximum of 11 characters.
3. Any or all of the Usernames and Passwords can be removed by entering
4. Removing all Usernames and Passwords would only allow access to the
5. FTP access is restricted to Admin Username/Password only. FTP is only
Use this page to define the passwords required for access via HTTP, FTP, SNMP, and Telnet.
This page contains the following unique selections/fields:
Selection
Admin User/Password
Read/Write User/Password
Read Only User/Password
Entry
E
T
"NONE NONE" from the CLI or Telnet.
IP functions when connected via the Terminal Emulator (serial)
connection (because there is no log in).
used to upgrade the IP SOFTWARE or to load or retrieve the IP
Parameter file.
Entry
A
W
R
Description
Selectable only when Managed Switch is the selected Working
Mode: Allows user to enable or disable the ability to route multicast
IP traffic over the satellite or to another device on the local LAN.
Determines, in minutes (1-60), the period of Telnet inactivity before
the Telnet session is automatically terminated.
Description
Enter the user name and password with a space delimiter.
Example: <user> <passwd>
Type NONE NONE to erase
Enter the user name and password with a space delimiter.
Example:<user> <passwd>
Type NONE NONE to erase
Enter the user name and password with a space delimiter.
Example:<user> <passwd>
Type NONE NONE to erase
8–7
Revision 2
MN/CDD564L.IOM