Feature Configuration Page - Comtech EF Data CDD-562L Installation And Operation Manual

CDD-562L/564 Demodulator with IP Module
CDD-56X CLI and Telnet Operation
8.2.2.3

Feature Configuration page

•
Chapter 1. INTRODUCTION
•
Appendix A. FAST ACTIVATION PROCEDURE
Access the Feature Configuration from the Administration page to display the current availability
for each feature. Any feature marked "Unavailable" is a FAST feature that must be activated with
a FAST Option Purchase Access Code.
This page contains the following unique selections/fields:
Selection
Ping Reply
Telnet
SNMP
Entry Description
P Toggles [Enabled] or [Disabled]:
• Enabled tells the demodulator to respond to ping requests
directed to the demodulator Ethernet Interface.
• Disabled tells the demodulator not to respond to ping
requests. This is used as a security feature to prevent
unauthorized parities from determining if a device exists via
the ping utility.
E Toggles [Enabled] or [Disabled]:
• Enabled allows access via Telnet.
• Disabled denies access via Telnet.
N Toggles [Enabled] or [Disabled]:
• Enabled tells the demodulator to respond to SNMP requests
against the private and public MIB.
• Disabled tells the demodulator not to respond to SNMP
requests against the private and public MIB.
8–9
Revision 2
MN/CDD564L.IOM