DX-D 400
User Manual
Illustration 4-20
Portable Receptor Assembly with Non-Rotating Tray in Rad Table and Wall Stand
Brake Button in a Portable Receptor
Assembly (only for Rad Table)
Illustration 4-21
Detector Loading
88
RAD Table
LOADING AND UNLOADING THE TRAY
1.
Grab the Handle and pull the Tray until it is completely out.
2.
Then place the Detector centered in the Tray and push slightly the
end-stops with the Detector until it is fitted in the four stops of the tray.
3.
Guide outside the Detector Cable (if applicable) to avoid cable jams. Use
the Cable Clips to guide the cable out safely and fully insert the Tray.
4.
To unload the Detector, grab the Handle and pull the Tray until it is
completely out.
Brake Bar
Wall Stand
0232F EN 20191213