AGFA DX-D 400 User Manual page 65

4.1.3 DX-D 400 DIGITAL CONTROL PANEL
Illustration 4-3
DX-D 400 Digital Control Panel
Centering Indicator
Transversal Movement
Rotational
All Movements
0232F EN 20191213
SID Display
After the System is turned ON, a start up routine begins and the Control Panel
shows for three seconds the software version (a.e. V01 R0.0 = Vers.01 R0.0).
Then, the Display shows the position data of the Tube-Collimator Assembly.
(Angle and SID).
ANGLE DISPLAY: Indicates the Angle value of the Tube-Collimator Assembly
with respect to its vertical axis. In case of error, this Display flashes the error
code to be referenced (a.e. "E06").
SID DISPLAY: Indicates the Source-Image Distance (SID). The SID Display
shows "------" when the SID value is not defined, that is, when the
Tube-Collimator Assembly is not within the range of ±45
vertical axis or when it is not perpendicular to the RAD Wall Stand Receptor.
When the Tube-Collimator Assembly is pointing the RAD Wall Stand Receptor,
the Display shows the SID values configured during installation at the time each
distance is reached (a.e 110-150-180).
Angle Display
o
with reference to its
DX-D 400
User Manual
Horizontal Movement
Vertical Movement
All Movements
55