AGFA DX-D 400 User Manual page 140

DX-D 400
User Manual
.
Note
130
The APR is activated when one of the three Patient Size (small, medium or large
size) is selected (push-button lighted), and it is deactivated when all of them are
deselected.
The language pack of the factory pre-programmed APR
techniques is configured according to the customer order and it
can not be changed by the operator.
APR language in the pack (three languages) may be changed, just
after selecting one of the patient size (APR activation), pressing
the "Power ON" push-button. Language selected remains stored
even after the equipment is turned Off.
(Refer to Appendix B for the available APR Matrix).
APR DISPLAY: Shows the different Body Regions and Anatomical Views
available for each APR technique, and the final APR selection.
Because each area of the APR Display is limited in length to eight characters,
some regions and views are abbreviated.
PATIENT SIZE: These push-buttons are used to adapt the APR technique
chosen according to patient size. Six patient sizes are available. The three
right-hand push-buttons select Small, Medium and Large adult sizes (one only
illuminated when selected). The left-hand pediatric push-button changes the
function of the right-hand three push-buttons from adult patient size to pediatric
patient size. (In this mode, the pediatric push-button and one of the other three
buttons may be illuminated at the same time).
ANATOMICAL VIEW SELECTORS: Each push-button is related with the
nearest area of the APR Display and they are used to select one of the displayed
Body Regions, Organs and Projections. The selected Region and Views
appears in negative block (
The APR display shows the Body Regions, Organs and Projections. When a
Body Region has been selected its indication is locked on the screen and the
APR Display shows directly all its respective Organs. In some cases, an Organ
may show several Projections.
When the APR selection is finished, the Console shows the final selection (APR
Display), its respective parameters (RAD Display), the Workstation and AEC
controls related to the technique. (Refer to Appendix B for the APR Regions /
Organs / Projections factory pre-programmed).
To go back to the previous level, press on the right-lower APR push-button
which shown the "return" symbol.
).
SKULL
0232F EN 20191213