AGFA DX-D 400 User Manual page 85

4.5.1 TILTING OF RECEPTOR ASSEMBLY
Goniometer for Tilting
Mechanical Detent
0232F EN 20191213
The Receptor Assembly allows a tilting range from --20
o o
of 90 (0 is the vertical position). A mechanical detent is provided to lock the
Receptor Assembly at 0
Release the Mechanical Detent. Press and hold the Tilting Lock Button to
release the electrical lock and manually tilt the Receptor Assembly. Place the
hand at the lower part of the Receptor Assembly and push it slightly in opposite
direction of the Tilting movement and hold the Receptor Assembly until it
reaches the desired Angle. The inclination is indicated on both lateral
goniometers.
DRIVE CAREFULLY MOVEMENTS OF THE RECEPTOR
ASSEMBLY WHEN RELEASING THE ANGLE LOCKS, THE
INTERNAL SPRINGS TEND TO GO UP AND THE RECEPTOR
ASSEMBLY MAY HIT THE PATIENT.
Tilting Lock Button
o
(vertical position).
Tilting Movement Direction
DX-D 400
User Manual
o
to a horizontal position
75