AGFA DX-D 400 User Manual page 92

DX-D 400
User Manual
4.6.3 TRAY FOR CASSETTE FILM OR CR (TABLE OR WALL STAND)
Fully open the Tray
Open the Automatic Clamp, Insert the Cassette and
adjust it to the Cassette
82
The Bucky Assembly is installed on a carriage, below the Tabletop. It contains
a manual Cassette Tray, which accepts all the standard Cassette / CR sizes
from 13x18 cm to 35x43 cm (5x7" to 14x17").
RECEPTOR TRAY (Cassette / CR): Pull out the Tray to load a Receptor
according to its size and orientation. Place manual clamps at corresponding
numbered notch, open the automatic clamp and insert the Cassette. This Tray
accepts all standard Cassette/CR sizes.
(*) these pictures correspond to a Table Bucky Assembly
but also describe the usage in a Wall Stand.
Set the manual clamps at the corresponding number
Lock the Cassette and insert the Tray
0232F EN 20191213