AGFA DX-D 400 User Manual page 121

.
Note
.
Note
0232F EN 20191213
PATIENT SIZE: These buttons are used to select the Patient Size (small,
medium or large size) for the APR technique chosen. Six patient sizes are
available.
The three upper buttons select "Small", "Medium" and "Large" adult sizes (only
one selected at the same time). The lower button selects "Pediatric" , this button
is selected together with one of the "Small", "Medium" and "Large" sizes.
LABELS OF REGION / VIEW / PROJECTION: Labels are classified in three
levels: Body Regions, Anatomical Views and Projections. The lateral indicator
of the level activated is highlighted.
When a Body Region has been selected, its label is highlighted on the screen
and the View level shows all its respective Anatomical Views.
When an Anatomical View has been selected, its label is highlighted on the
screen and the Projection level shows all its respective Projections (if the
Anatomical View has different Projections).
When the APR selection is finished, the Console shows the Workstation, its
respective parameters (RAD Displays) and the AEC controls (if applicable)
related to the APR technique.
The maximum number of labels for each level is ten (10).
LABEL POSITIONERS: Select a label and change its position inside the level
by touching any of these buttons.
NEW: To create a new Region, View or Projection, first click on the lateral
indicator of the Region, View or Projection or on any Region, View or Projection
label (the lateral indicator of the selected level appears highlighted), then touch
on the "New" button.
Creating a Region, View or Projection will not be allowed in case
all the positions are already filled (maximum ten labels).
DX-D 400
User Manual
111