AGFA DX-D 400 User Manual page 72

DX-D 400
User Manual
.
Note
4.3.2 RAD TABLE - - ELEVATING TABLE
Table-Top
Telescopic Covers
62
TABLE-TOP BRAKE PEDAL: The Table-Top is provided with four-way floating
movement for better patient positioning.
Press and hold Pedal in order to release longitudinal and transverse brakes of
Table-Top. Release Pedal to apply brakes.
The transverse motion is blocked when the Table-Top is centered with respect
to its horizontal axis. Step again to continue motion.
The Collimator Lamp turns on automatically when this Pedal is pressed for ease
in patient positioning.
For Receptor Assembly information refer to Section 4.6.
The RAD Table with its variable height has been designed for easy access from
beds, wheelchairs or stretchers with patient care and comfort in mind.
The Table-Top travels are controlled with the Pedals located at the Table Base.
Also the Table incorporates two safety devices and a control for the RAD Table
positioning.
Receptor Carriage Handle
Table-Top Motion Pedal
THE MAXIMUM PATIENT WEIGHT SUPPORTED WITH THE
TABLE-TOP AT ANY POSITION IS 350 KG (771 LBS) EVENLY
DISTRIBUTED OVER THE SURFACE OF THE TABLE-TOP.
EXCEEDING THIS LIMIT MAY CAUSE EQUIPMENT DAMAGE
OR INJURY TO THE PATIENT.
Up Pedal
Table-Top Lock Switch
Down Pedal
Emergency-Off Switch
0232F EN 20191213