AGFA DX-D 400 User Manual page 70

DX-D 400
User Manual
4.2 DOSEMETER DEVICE (OPTIONAL)
.
Note
4.3 RAD TABLE
4.3.1 RAD TABLE - - FIXED HEIGHT TABLE
Table-Top
60
The optional Dosemeter device is related to the Collimator installed in the Tube
Stand. It is used for simultaneously determining the dose area product, dose
area product rate and irradiation time. The usual compatible Dosemeter
devices are VacuDAP 2004 Series.
Refer to the corresponding Dosemeter Manual for extended
information about operation or technical description needed to
maintain compliance with Standard IEC 60601- -1- -3: 2008.
Follow operation instructions for "RAD Table -- Fixed Height Table" (refer to
Section 4.3.1) or for "RAD Table -- Elevating Table" (refer to Section 4.3.2)
depending on the type of table installed at site.
The Table-Top movement is controlled by the Brake Pedal. Press on the
Receptor Carriage Handle Button to position it.
Receptor Carriage Handle
Table-Top Brake Pedal
Emergency-Off Switch
Table-Top Lock Switch
0232F EN 20191213