AGFA DX-D 400 User Manual page 59

3.2 SHUTDOWN ROUTINE WITH X-RAY GENERATOR CONTROL
.
Note
Illustration 3-2
Shutdown sequence
1
NX Workstation
2
X-Ray
Generator
Control
0232F EN 20191213
To turn the System OFF:
1. Turn OFF the NX Workstation.
2. Press the X-Ray Generator Control OFF button, the Green Lamp turns
OFF.
3. Turn OFF the Room Electrical Cabinet Switch (with the Emergency
Switch in OFF position).
It is not necessary to turn OFF the Circuit Breaker or the
Emergency Off Switch of the Table before turning off the Room
Electrical Cabinet Switch.
DX-D 400
User Manual
3
Room
Electrical
Cabinet
49