DX-D 400
User Manual
This warning message is shown until the parameters / selections
110
for the new created APR Technique are set
QUIT: Touch this button to exit from the "Edit" options and go back to the
previous screen (Restore Default / Edit / Exit).
CHANGE PASSWORD: After touching this button, the Console shows a Panel
for entering the new Operator Password.
Follow the "Change Password" procedure and enter twice the new Password
(four digits) then touch "OK" to close this option. Now, the default Password
"1111" is replaced by the new Password.
Save changes before exiting
from "Edit" menu
0232F EN 20191213