AGFA DX-D 400 User Manual page 116

DX-D 400
User Manual
106
APR DISPLAY: It shows the different Body Regions and Anatomical Views
available for each APR technique and the final APR selection. As the area of
the APR Display is limited in length, the name of some Regions, Views or
Projections is abbreviated.
When a Body Region has been selected, its indication is locked on the screen
and the APR Display show directly all its respective Anatomical Views and then
its respective Projections (if the Anatomical View has different Projections).
(Refer to Appendix B for the APR Regions / Views / Projections factory
pre-programmed).
When the APR selection is finished, the Console shows the final selection (APR
Display), the Workstation, its respective parameters (RAD Displays) and the
AEC controls (if applicable) related to the APR technique.
To go back to the previous level, touch on the right-lower APR selector ("Up").
PATIENT SIZE: APR is activated when one of the three Patient Size (small,
medium or large size) is selected. These buttons are used to adapt the APR
technique chosen according to patient size. Six patient sizes are available.
The three right-hand buttons select Small, Medium and Large adults sizes (only
one selected at the same time). The left-hand "Pediatric" button changes the
function of the right-hand three buttons from adult patient size to Pediatric
patient size. (In this mode, the "Pediatric" button and one of the other three
buttons may be selected at the same time).
APR SELECTORS: Each button is related to the nearest area of the APR
Display and they are used to select one of the displayed Body Regions,
Anatomical Views or Projections. The selected Region, View or Projection
appears in the middle of the APR Display.
0232F EN 20191213