DX-D 400
User Manual
Illustration 4-18
Tray Loading
Illustration 4-19
Tray unloading
2
86
LOADING AND UNLOADING THE TRAY
1.
Grab the Handle and pull the Tray until it is completely out.
2.
Then place the Detector, centered on the Tray and insert it in the tray.
Push slightly the end-stops with the Detector end until it is fitted in the
frame of the tray.
3.
To unload de Receptor, fully extract the tray.
4.
Push the Detector towards the end Stop and carefully lift and remove the
Detector with both hands.
1
1
2
0232F EN 20191213