AGFA DX-D 400 User Manual page 74

DX-D 400
User Manual
Illustration 4-5
Elevating Table Pedals
Table-Top
.
Note
.
Note
64
Down
TABLE-TOP MOVEMENT PEDALS: Step on any of the two pedals (at both
ends of the Pedal row) in order to release longitudinal and transverse brakes,
this allows free movement of Table-Top for better positioning of patient.
Release Pedal to block movement.
The transverse movement is blocked when the Table-Top is centered with
respect to its horizontal axis. Release the pedal and step twice again to continue
movement.
The Service Engineer can modify the configuration of the pedals and change
from the single step to release longitudinal and transverse brakes of the
Table-Top to a double step.
UP PEDAL: Step on Pedal in order to lift Table-Top to desired height. Release
Pedal to stop movement.
DOWN PEDAL: Step on Pedal in order to lower Table-Top to desired height.
Release Pedal to stop movement.
A Height Detent in the Up and Down Travel of the Table-top can
be set by the Service Engineer to stop the Table-Top automatically
at the operator desired height.
For Receptor Assembly information refer to Section 4.6.
Up Table-Top
0232F EN 20191213