AGFA DX-D 400 User Manual page 156

DX-D 400
User Manual
8.2 SERVICE TASKS
146
3. Clean the equipment frequently, particularly if corroding chemicals are
present. Clean external covers and surfaces, specially parts in contact
with patients, with a cloth moistened in warm water with mild soap. Wipe
with a cloth moistened in clean water. Do not use cleaners or solvents
of any kind.
When it is needed to disinfect any surface, clean it with a cloth
impregnated with isopropyl alcohol.
Do not apply directly any liquid on the surfaces, nor use cleaners
containing bleach, ammonia or any other abrasive or solvent liquid, it
could cause damage to the equipment.
Only service personnel specifically trained on this medical X-ray equipment
should work on service tasks (installation, calibration or maintenance) of the
equipment. (Refer to the respective chapters of the Service Manual provided
with this equipment.)
0232F EN 20191213