AGFA DX-D 400 User Manual page 76

DX-D 400
User Manual
4.3.4 COMPRESSION BAND (OPTIONAL)
Illustration 4-6
Compression Band Operation
Compression Band as delivered
Extend the Band, hook one end and obtain the required tension with the Lock Lever
66
This device supplies compression to the anatomical area of interest in order to
avoid unnecessary movements.
It is mounted on the Tabletop rails. Install both brackets of the Compression
Band in the Table-top rails, roll the band in the shaft, engage the end of the band
in with the hooks and use the lever lock or unlock the Compression Band to get
the required tension of the Band.
Insert the Band Support and the opposite Support in the Table-top
Rails
Lock Lever
0232F EN 20191213