AGFA DX-D 400 User Manual page 110

DX-D 400
User Manual
Decrease Button
100
INCREASE / DECREASE: Radiographic technique values are increased or
decreased by selecting the respective RAD Display (which will be highlighted)
and changing the value with the "Increase" or "Decrease" buttons.
The values increase or decrease step-by-step each time the corresponding
button is touched, and change faster when either of them is touched
continuously.
Also, the value can be directly selected by clicking on its position on the bar.
When this indicator is positioned over a value not allowed, it comes back to the
previous position and the parameter value does not change.
Bar Indicator for value selection
kVp: Selects the X-ray Tube voltage.

mA: Selects the X-ray Tube current. The Focal Spot selection can be

changed when the mA value is selected with the "Increase" or "Decrease"
buttons. The slider of the bar can only set the mA values of the selected
Focal Spot.
mAs: Selects the exposure in mAs.

s: Selects the exposure Time in seconds.

(Refer to Section 9.3 for Factor ranges).
Increase Button
0232F EN 20191213